Are you having issues with your hardwood floors? Although these floors are designed to last for a lifetime, this doesn’t mean that they don’t require some general maintenance and troubleshooting. Instead, you’ll have to come up with some quick fixes to common issues, such as stains and signs of wear. Here are some things that you can do, courtesy of flooring services the colony tx.
Does your house sound like its haunted thanks to the creaky boards and constant sounds of footsteps even when no one is walking around? Well, these are either the sounds of the house settling or proof that your contractor used a too-thin piece of particle board for the subfloor. Your floor joists might also be too far apart. Thankfully, you can beef up your floorboard from below. If the ceiling in the basement I open, then you just have to add in some additional supports down there to take care of the first floor. The process is trickier on the other floors because you’ll have to demolish part of the ceiling to get to the undersides of the floor. (It might just be easier to put up with the creaky boards.)
This is a common problem that happens with time. The UV rays of the sun that shine in have a bad habit of fading your floorboards. In order to keep them fading into certain patterns, you can rearrange your furniture regularly so that different parts of the floor are exposed. You can also put up curtains and blinds in order to block out the sun. This will help quite a bit. However, if the fading is very bad, you’ll have to strip your floor and refinish it.
In order to prevent your floor from staining, you need to wipe up all spills immediately. Grab a soft cloth or even a paper towel and blot the stain away. If the spilled substance leaves behind a sticky residue, pull out your floor cleaning solution and do some spot treatment. Remember that the longer you leave the spot behind, the worse it will get.
Over time, extremely low humidity can actually damage your floor, causing the boards to separately and begin to gap. You need to constantly measure the humidity in the air (look for devices sold for museum storage that do this) and add in moisture when necessary. There are plenty of appliances that can do this, many of which are sold in stores.
If the humidity in your home is consistently too high, your floorboards may begin to cup. This happens when they expand, due to the moisture content in the air, and keep pressing against each other. You can combat this by removing the moisture from the air and keeping an eye on the overall humidity in your home.
If you have any questions about these tips, contact us here: flooring services the colony tx.